Paper Shredding Machine Technical Configuration
Paper Shredding Machine Configuration Data
| Specification | Configuration Value |
|---|---|
| Configuration | Paper Shredding Machine |
| Feed Chamber (Width × Length) | 80 × 60 |
| Machine Dimensions (Width × Length × Height) | 130 × 100 × 180 cm |
| Motor Record 1 | 22 kW · 1200 rpm |
| Machine Weight | 2,000 kg |
| Cutting-Element Entry | 16 |
| Machine Body Thickness | 15 mm ST37 |
| Conveyor Type and Entry | Rubber chevron type · 5 m |
| Conveyor Width | 70 cm |
| Motor Record 2 | 1.5 kW · 25 rpm |
| Side-Body Sheets Entry | 30 cm |
The table presents the recorded paper shredding machine values for the feed chamber, cutting-element entry, machine body, two motor power-and-speed records and chevron conveyor.
Product Brochure
Technical Brochure
Download the current PDF brochure for technical specifications, configuration details and layout references.
Paper Shredding Machine
A paper-shredding configuration with conveyor-fed cutting and project-specific interfaces.
The paper-shredding configuration records 30 cm for the side-body sheets; the dimensional axis remains unstated. Accepted paper forms, target output, capacity, voltage and safety provisions are defined for the approved project scope.
-
Motor Power and Speed Records
The two recorded pairs are 22 kW / 1200 rpm and 1.5 kW / 25 rpm; their component roles are not assigned by the technical entry.
-
Rubber Chevron Conveyor
The conveyor is recorded as rubber chevron type with a 5 m entry; its width is recorded separately as 70 cm.
-
Cutting and Body Entries
The configuration records a cutting-element entry of 16, a 15 mm ST37 body and a 30 cm entry for the side-body sheets.
Paper Stream & Output Duty
Define the paper-reduction duty from project material data.
Accepted paper forms, target output and required capacity are defined from representative material and the operating duty.
Capacity, output-size range, accepted-paper matrix, voltage and safety provisions are defined for the approved project configuration.
- Product Configuration
Keep the paper-shredding configuration values together and do not combine them with another paper-shredding configuration.
- Feed-Chamber Coordination
Confirm the unit and orientation of the 80 × 60 feed-chamber entry in approved project drawings before layout work.
- Paper Stream Data
Document form, dimensions, bindings, moisture and foreign material before equipment selection.
- Motor Records
Coordinate the 22 kW / 1200 rpm and 1.5 kW / 25 rpm records with their components in approved project drawings.
- Side-Plate Coordination
Confirm the 30 cm side-body plate source value in the approved manufacturing documentation.
- Project Data
Confirm capacity, output size, voltage, performance and safety provisions in the approved technical offer.