TBH70 Technical Configuration
TBH70 Configuration Data
| Specification | Configuration Value |
|---|---|
| Configuration | THE BALER TBH70 |
| Feed Chamber (Width × Length × Height) | 110 × 130 × 85 |
| Compression Time | 30 s |
| Main Press-Cylinder Force | 70 ton |
| Automatic Wire Tying | 4 wires |
| Working Pressure | 200–280 bar |
| Electric Motor Power | 30 kW |
| Machine Operation | Electrically powered automatic operation |
| Machine Total Weight | 10,000 kg |
| Bale Weight | 500–750 kg |
| Capacity | 5 t/h |
| Hopper Top Height from Floor | 3.1 m |
| Base Bottom Plates | 20 mm ST52 |
| Side Body Plates | 15 mm |
| Electrical Automation Panel | Siemens |
| Hydraulic Pump | Kawasaki 105 cc |
| Automation | PNC automation |
| Perforator Reducers | 2 units · 2.2 kW each · Speed definition pending engineering review |
| Perforator Blades | 120 |
| Perforator Movement | Mobile/movable |
| PET Perforator | 1 unit · Roller configuration pending engineering review |
| Steel Conveyor | 13 m · 120 cm |
| Cooler | Included |
The table presents the available TBH70 values for the feed chamber, steel conveyor, hydraulic drive, automatic tying and bale-handling arrangement.
Product Brochure
Technical Brochure
Download the current PDF brochure for technical specifications, configuration details and layout references.
Fully Automatic Horizontal Baler
A fully automatic horizontal-baler configuration with a steel conveyor, PET perforator and four-wire tying.
The TBH70 configuration combines a 13 m steel conveyor, a 110 × 130 × 85 feed-chamber dimension order, a hopper top 3.1 m above the floor, horizontal compression, a movable PET-perforation system and automatic four-wire tying. The hydraulic package uses 200–280 bar working pressure, a Kawasaki 105 cc pump and a 30 kW electric motor. Structural entries include 20 mm ST52 base-bottom plates and 15 mm side-body plates. The electrical package includes a Siemens panel and PNC automation. The perforation system includes two 2.2 kW reducers, 120 blades and one PET perforator. Approved project drawings define the overall envelope, anchoring and service clearances for installation.
-
70-Ton Main Press
The main press-cylinder force is 70 ton and the compression time is 30 seconds.
-
Four-Wire Automatic Tying
The configuration uses four-wire automatic tying with a 500–750 kg material-dependent bale range.
-
Integrated Feed and PET Perforation
The configuration includes a 13 m steel conveyor, movable perforation equipment, 120 blades and one PET perforator.
Material & Operating Duty
Match the TBH70 configuration to the material and operating duty.
Review material composition, feed pattern, moisture and operating hours when evaluating capacity, bale weight and the complete compression cycle.
The 5 t/h capacity and 500–750 kg bale range depend on material condition, preparation, feed duty and the approved project configuration.
- Model Configuration
Keep TBH70 values together and do not combine them with the separate TBH150 configuration.
- Capacity Basis
Evaluate the 5 t/h capacity against the actual material, feed duty, measurement period and required availability.
- Bale-Weight Basis
The 500–750 kg range varies with material, moisture, density and preparation.
- Feed-Chamber Coordination
Confirm the unit and orientation of the 110 × 130 × 85 feed-chamber entry in the approved project drawings before layout work.
- Conveyor and Perforator Interface
Coordinate the 13 m steel conveyor, 120 cm entry and movable PET-perforation equipment within the approved line layout.
- Installation Data
Use the approved general arrangement for the overall machine envelope, anchoring layout and service-clearance dimensions.