TBH150 Technical Configuration
TBH150 Configuration Data
| Specification | Configuration Value |
|---|---|
| Configuration | THE BALER TBH150 |
| Main Press-Cylinder Force | 150 ton |
| Bale Dimensions | 125 × 115 cm |
| Feed Chamber (Width × Length × Height) | 115 × 180 × 125 |
| Compression Time | 30 s |
| Automatic Wire Tying | 5 wires |
| Working Pressure | 200–280 bar |
| Electric Motor Power | 2 × 55 kW |
| Machine Weight | 25,000 kg |
| Bale Weight | 1,250–1,500 kg |
| Z Conveyor | 16 m long × 165 cm wide |
| Capacity | 16 t/h |
| Hopper Top Height from Floor | 4 m |
| Base, Side and Top Plates | 30 mm ST37 plate |
| Side Body Plates | 25 mm |
| Electrical Automation Panel | Siemens |
| Hydraulic Pumps | Kawasaki 200 cc + 140 cc |
| Automation | PNC automation |
| Conveyor Drums and Chain | Four drums; 45 cm gear diameter; 6 mm chain-link thickness. |
| Conveyor Drive | 5.5 kW motor; Yılmaz KR-573 gearbox; 15 rpm. |
| Conveyor Pallet Plate | 5 mm, laser-cut |
| Cooler | Large cooler |
The table presents the available TBH150 values for the feed chamber, conveyor, hydraulic drive, automatic tying and bale-handling arrangement.
Product Brochure
Technical Brochure
Download the current PDF brochure for technical specifications, configuration details and layout references.
Fully Automatic Horizontal Baler
A fully automatic horizontal-baler configuration with integrated conveying and five-wire tying.
The TBH150 configuration combines a Z-type feed conveyor, a hopper top 4 m above the floor, horizontal compression, automatic five-wire tying and bale discharge. The main hydraulic package uses two 55 kW motors and Kawasaki 200 cc plus 140 cc pumps at 200–280 bar. Structural entries include 30 mm ST37 base, side and top plates and 25 mm side-body plates. The electrical package includes a Siemens automation panel and PNC automation. The conveyor uses a 5.5 kW motor, Yılmaz KR-573 gearbox at 15 rpm, four drums with a 45 cm gear diameter, 6 mm chain-link thickness and 5 mm laser-cut pallet plate. Approved project drawings define the overall envelope, anchoring and service clearances for installation.
-
150-Ton Main Press
The main press-cylinder force is 150 ton and the compression time is 30 seconds.
-
Five-Wire Automatic Tying
The configuration uses five-wire automatic tying with a 125 × 115 cm bale format.
-
Integrated Conveyor Drive
The Z conveyor is 16 m × 165 cm with a 5.5 kW motor and Yılmaz KR-573 gearbox at 15 rpm.
Material & Operating Duty
Match the TBH150 configuration to the material and operating duty.
Review material composition, feed pattern, moisture and operating hours when evaluating capacity, bale weight and the complete compression cycle.
The 16 t/h capacity and 1,250–1,500 kg bale range depend on material condition, preparation, feed duty and the approved project configuration.
- Model Configuration
Keep TBH150 values together and do not combine them with the separate TBH70 configuration.
- Capacity Basis
Evaluate the 16 t/h capacity against the actual material, feed duty, measurement period and required availability.
- Bale-Weight Basis
The 1,250–1,500 kg range varies with material, moisture, density and preparation.
- Feed-Chamber Coordination
Confirm the unit and orientation of the 115 × 180 × 125 feed-chamber entry in the approved project drawings before layout work.
- Conveyor Interface
Coordinate the 16 m × 165 cm Z conveyor and the hopper top 4 m above the floor within the approved line layout.
- Installation Data
Use the approved general arrangement for the overall machine envelope, anchoring layout and service-clearance dimensions.